UNS S20100 Square Bars, SS 201 Square Bars, AISI SS 201 Stainless Steel 201 Square Bars Supplier, Manufacturer and Exporter in India
Din 1.4372 SS 201 Square Bars, SS UNS S20100 Square Bars, Stainless Steel 201 Square Bars, 201 Stainless Steel 201 Square Bars Suppliers in India.
DESCRIPTION:
Type 201 Stainless Steel is an austenitic chromium-nickel-manganese stainless steel which was developed to conserve nickel. Type 201 is a lower cost alternative to conventional Cr-Ni stainless steels such as 301 and 304. Nickel is replaced by additions of manganese and nitrogen. It is non-hardenable by thermal treatment, but may be cold worked to high tensile strengths. Type 201 is essentially nonmagnetic in the annealed condition and becomes magnetic when cold worked. Type 201 can be substituted for Type 301 in many applications
PRODUCT FORMS:
Sheet, Strip
SPECIFICATION:
ASTM A240, A666
TYPICAL APPLICATIONS:
Typical applications for Types 201 are cookware, hose clamps, piston rings, transit car structural member, transit car roofing/siding, thermal window spacers, air bag containers, and truck trailer posts and door frames.
PROCESSING:
The annealing temperature for Type 201 is between 1850-2000°F. Rapid cooling through the carbide precipitation range (1500 – 800 o F) is necessary to keep the carbides in solution and prevent sensitization. Type 201 is not hardenable by thermal treatment; it is only hardenable by cold working.
FORMING:
Type 201 has similar bending, forming and drawing characteristics to Type 301 stainless steel
WELDING:
Type 201 can be welded by all conventional methods applied to 18 percent chromium, 8 percent nickel steels. Filler metal of the conventional chromium-nickel analyses can be used. Like other austenitic stainless steels where carbon is not controlled below 0.03%, Type 201 is susceptible to intergranular corrosion in the weld heat affected zone.
CORROSION:
Type 201 is resistant to a wide variety of mild to moderately corrosive environments. It has corrosion resistance approaching that of Types 301and has been successfully substituted for 304 in many mild environments.
CHEMICAL PROPERTIES:
Element
Type 201
Carbon
0.15x
Manganese
5.5 - 7.5
Sulfur
0.03X
Phosphorus
0.060x
Silicon
1.0 x
Chromium
16 - 18
Nickel
3.5 -5.5
Nitrogen
0.25x
PHYSICAL PROPERTIES:
Density (lb./ in^2) @ RT
0.283
Modulus of Elasticity in Tension (psi x 10^6)
28.6
Specific Heat (BTU/o F/lb.)
32 to 212 oF
0.12
Thermal Conductivity (BTU/hr/ft^2/ft)
212oF
9.4
Mean Coefficient of Thermal Expansion (in. x 10^-6 per o F)
32 to 212oF
8.7
32 to 600oF
9.7
32 to 1,000oF
10.2
Electrical Resistivity (micro ohms - cm)
at 70oF
69
Melting Point Range (oF)
2550/2650
Oxidation Resistance - Continuous Service(oF)
1550
Oxidation Resistance - Intermittent Service(oF)
1500
SQUARE BAR PRODUCT OVERVIEW:-
Stainless Steel Square Bar
Thickness Range of Stainless Plate
3/16″ THRU 4″ (LARGER SIZES AVAILABLE UPON REQUEST)
Grades
202, 304/304L, 316/316L,304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410. In duplex grades, we can supply 2205 and 2507. Some nickel Alloy such as alloy 200/201, C276, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and others Titanium alloys and copper alloys are also available
INVENTORY:-
X = Stocked Item
P = Call For availability square bar can be cut to size.
Square bar can be polished per customer specifications.
Square bar is stocked in Penn met 2000 for improved machinability.
Size in Inches
Wt per Ft
Wt per 12′
303
304/L
316/L
416
3/16″
0.120
1.440
X
X
X
P
1/4″
0.210
2.52
X
X
X
P
5/16″
0.330
3.96
X
X
X
X
3/8″
0.480
5.76
X
X
X
X
7/16″
0.650
7.80
X
X
X
X
1/2″
0.850
10.20
X
X
X
X
9/16″
1.080
12.96
X
X
X
X
5/8″
1.330
15.96
X
X
X
X
3/4″
1.910
22.92
X
X
X
X
7/8″
2.610
31.32
X
X
X
X
1″
3.400
40.80
X
X
X
X
1-1/8″
4.310
51.72
X
X
X
X
1-1/4″
5.320
63.84
X
X
X
X
1-3/8″
6.400
76.80
X
X
X
X
1-1/2″
7.600
91.20
X
X
X
X
1-3/4″
10.400
124.80
X
X
X
X
2″
13.600
163.20
X
X
X
X
2-1/4″
17.200
206.40
X
X
X
X
2-1/2″
21.300
255.60
X
X
X
X
3″
30.63
367.56
X
X
X
P
4″
54.40
652.80
X
X
X
P
PROCESSING:-
Customers can select a number of processing options to produce stainless steel bars to their exact specifications, reducing materiel costs, production time, scrap and internal handling.
Long Product Processing Services Overview
Square Bar Cutting
Products cut include Round Bar, Flat bar, Hex bar, Square bar, Tubing and Hollow Bar, Pipe, Angles, channels, Beams and Tees. Thickness range is 1/16″ to 28″ diameter
Square Bar Production Cutting
Penn Stainless can provide production cutting for product diameters up to 4″. We utilize Amanda Production Equipment to achieve these precision cuts with tight tolerances.
Square Bar Polishing
Products polished included all tubular products, with OD & ID polishing available, Round Bar, Square Bar, Hex & Flat bar, Angles, Uneven Leg Angles, beams, and other shapes.
TOLERANCES FOR COLD AND HOT SQUARE BARS
COLD FINISHED SQUARE BAR TOLERANCES:
CF Tolerances
Plus
Minus
1/8″ to 5/16″ (exclusive)
0.000
0.002
5/16″ to 1/2″ (exclusive)
0.000
0.003
1/2″ to 1″ (inclusive)
0.000
0.004
over 1″ to 2″ (inclusive)
0.000
0.006
over 2″ to 3″ (inclusive)
0.000
0.008
COLD FINISHED SQUARE BAR STRAIGHTNESS TOLERANCES:
CF: 1/16 inch in any 5 foot; but may not exceed 1/16 X (length in ft/5)
HOT FINISHED SQUARE BAR TOLERANCES:
HF Tolerances
Plus
Minus
Out of Sq
Over 7/8″ to 1″ (inclusive)
0.009
0.009
0.013
Over 1″ to 1-1/8″ (inclusive)
0.010
0.010
0.015
Over 1-1/8″ to 1-1/4″ (inclusive)
0.011
0.011
0.016
Over 1-1/4″ to 1-3/8″ (inclusive)
0.012
0.012
0.018
Over 1-3/8″ to 1-1/2″ (inclusive)
0.014
0.014
0.021
Over 1-1/2″ to 2″ (inclusive)
1/64
1/64
0.023
HOT FINISHED SQUARE BAR STRAIGHTNESS TOLERANCES:
HF: 1/8 inch in any 5 foot; but may not exceed 1/8 X (length in ft/5)
STAINLESS STEEL SQUARE BAR SPECIFICATIONS:
Stainless Steel Square Bar Specifications
ASTM A276
This specification encompasses cold-finished or hot-finished bars, including rounds, squares, and hexagons, and hot-rolled or extruded shapes, such as angles, tees, and channels in the more commonly used types of stainless steels.
ASTM A479
This specification includes cold and hot finished stainless steel bars, including rounds, squares, and hexagons, and hot-rolled or extruded shapes such as angles, tees, and channels.
ASTM A484
This specification includes wrought stainless steel bars, shapes, forgings, and billets or other semi-finished materials, except wire, for forging. The materials are available in four types of conditions.
ASTM A582
This specification includes cold or hot finished bars, which are suitable for machining processes. This specification includes rounds, squares, and hexagons, from common types of stainless free-machining steels.
ASTM B473
This specification includes nickel alloy bar & wire, which can be produced in a solution-annealed condition, stabilized-annealed condition, or annealed condition.
We export our STAINLESS STEEL 201 SQUARE BARS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at
harshsteel@ymail.com for your instant requirements.